Key points for purchasing aluminum Beam For Needle Loom

Maybe some mechanical equipment operators think that the Beam For Needle Loom is a relatively inconspicuous accessory on the loom, so they don't particularly care about it. In fact, this kind of thinking is very bad. If the pan head of the loom is not a good choice, it is prone to some accidents if it bursts. Therefore, the purchase of the Beam For Needle Loom has become very important. Manufacturers of aluminum alloy Beam will talk about how to buy Beam For Needle Loom.

Points to pay attention to when choosing the Beam For Needle Loom

1. First of all, we must change the traditional concept that a heavy Beam means good quality. In fact, many manufacturers just make the iron pipe in the middle of the Beam very thick and heavy, which can reach a weight of 4KG, but the disc is very light. The Beam made by other manufacturers with miscellaneous aluminum are also very heavy. Of course, this is not to say that the quality of the heavy Beam is not good. The quality of the pan head is not a matter of importance. The most important thing is to look at the workmanship and material! For example, the relatively hot magnesium alloy Beam bought on the market two years ago, and the all-aluminum die-cast pan heads currently on the market. The weight is only 5.6KG, but the quality is very good and very popular with customers and employees, the quality is very good and the weight is very light and very convenient to use!

2. Identification of the Beam material: The surface of the Beam made of pure aluminum ingots is very smooth and delicate at a glance. On the contrary, the surface of the Beam made of mixed aluminum will be very rough and have many pores, which will be buried for future bursts. Bane. I advise you not to choose pan heads made of miscellaneous aluminum even if the price is very cheap!

3. Identification of workmanship: The die-cast Beam will have better hardness than the cast Beam disc, and the yarn will not burst when the expansion force of the yarn is large! This can be seen by checking the hardness of the Beam.

4. Guaranteed quality: When purchasing Beam, you must buy from a manufacturer or distributor with guaranteed quality, or you will not be able to get a good solution when there is a quality problem. If you can promise that there is a replacement for quality problems within one year, you can buy with confidence.

根据铝合金盘头生产厂家生产多年的经验，一般来说，如果1年以内质量没有问题，那么以后也会很少的出现质量问题。织带机盘头在采购的时候更多看的不是重量，而是织带机盘头的材质和做工。有需求的消费者可以来铝合金盘头生产厂家咨询铝合金盘头,经编机盘头,织带机盘头。